This bulletin describes the procedure for the event of an emergency loss in power or fault condition on your hired in equipment.

Procedure

  1. Before contacting Hybrid Power Hire Ltd, in order to offer a swift resolution, please have the following information available as you may be asked for this during the telephone call.
    • Fleet and Serial No.
    • Approximate time of power failure
    • What load(s) were on the equipment? e.g. heating, lighting, welfare facility etc.
    • Person who first reported the event
    • Person who is responsible on site
    • Responsible persons contact information
  2. Contact Hybrid Power Hire
    • During regular office hours Monday to Friday 09:00am until 17:00pm please call the office landline on +44 (0)1788 222 288 where a member of our team will be happy to assist you with your issues.

Outside normal office hours then the following numbers are contactable in hierarchy of preference;

  •         Joe Bolton (Technical Support Manager) –

Tel: +44 (0)7866 986 109 / E-mail: joe.bolton@offgrid-energy.co.uk

  •         Simon Daysh (Fleet Manager) –

Tel: +44 (0)7866 986 109 / E-mail: simon.daysh@hybridpowerhire.co.uk

  •        Danny Jones (Managing Director) –

Tel: +44 (0)7973 322 797 / E-mail: danny.jones@offgrid-energy.co.uk

Hybrid Power Hire Ltd will attempt to restore the equipment to an operational state via the on-board telemetry technology. In the event that the issue cannot be resolved remotely and a local visit is required; this will be arranged at the soonest convenience. Note: call out charges may apply.

ABB Timer Fuction And Setup

please click this link.2CSM441021D6401 – Digital time switches D Line

Single Phase Operators Manual

please click this link. single Phase Operation Manual

3 PHASE OPERATORS MANUAL

Please click this link 3phase Grid to Go Manual

Nano Series

Available in models from 400VA to 3kVA and with battery capacity from 740Whrs to 5kWhrs.

Hand portable, ruggedised, solid state, silent power supplies. Either an alternative or a complement to portable petrol generators. The nano series are ideal for power tools, computer equipment, lighting,recharging battery appliances, medical, A/V & communications equipment and much more.

Accessories include solar PV charging kits, in-vehicle charging kit, trolly base, connection and cable sets.

Please see our rate card for a full list of models and options. This is available on request.

×
Single Phase

With power outputs from 5 to 30kVA at 230V or 110V single phase AC and battery capacity ranging between 15 and 60kWhrs, our single phase range provide higher power and stored energy capacity.

Suitable for powering one day events on their own or together with solar PV to support extend use. Units can also be used to support limited mains power supplies or to be used with a diesel generator. Security cabins, emergency power supply for homes, utility work, dedicated welfare loads, individual EV charging or remote monitoring are all typical examples of applications to which these units are ideally suited.

Accessories include solar PV charging kits, road tow trailer, earthing, connection and cable sets. Suitable for cascade connection for higher power and capacity.

Please see our rate card for a full list of models and options. This is available on request.

×
Three Phase

Our three-phase range deliver power outputs ranging from 15 to 180kVA at 400/230V threephase AC with battery capacity ranging between 45 and 300kWhrs.

Applications are as diverse as supporting the accommodation, welfare and site loads in construction, tower cranes, large outdoor events, remote pumping, multiple EV charging, telecommunications towers, emergency power for multiple properties amongst many other duties.

Accessories include solar PV charging kits, earthing, connection and cable sets. Suitable for cascade connection for higher power and capacity.

Please see our rate card for a full list of models and options. This is available on request.

×
Self Contained

Self Contained Our range of self contained hybrid power systems offer complete “all-in-one” systems ranging between 10 and 500kVA. Suitable for quick and easy deployment and capable of long autonomous operation, these systems include diesel generator, high capacity fuel tank, integrated battery storage and automatic remote monitoring systems.

Deliver, plug in, turn on and away you go! These solutions are commonly used by utilities for longer-term emergency power, in remote telemetry and monitoring applications and other similar situations that are unmanned for long periods or where frequent fuel deliveries are undesirable and costly.

Please see our rate card for a full list of models and options. This is available on request.

×