Sectors > EV Charging

As the number of EV’s on our roads grows, the electricity network has to adapt. In locations where numbers of EV’s need to charge at the same time, or high capacity charging is needed, the grid may not be up to the job or, for temporary situations, not be available at all.

A smart feature of gridtogo™ is that we can use a low capacity grid supply and turn it into something more powerful using the energy saved in the battery. It may be a bus station, a parcel delivery depot or corporate HQ; the lack of power availability could be what prevents EV’s being adopted. The cost and timescales involved with grid upgrade can be significant too. For corporate promotions or conferences, sports and music events or seasonal holiday hot-spots, grid power may be lacking or not available at all. In these situations, installing an upgrade or running a diesel generator will be undesirable because of cost, environmental impact and timescales.

For permanent installations, gridtogo™ can be connected to your existing but limited capacity grid supply and utilise what is available, drawing on this power continuously but without overloading. Energy is stored in the battery ready to be discharged when EV’s are connected and demand for power is high.

Our smart charging technology can also be used to control and ration energy by interacting with the vehicles so that all the available power can be evenly distributed and ensure it is used as effectively as possible. Where it’s an option, gridtogo™ can capture energy from solar PV, rather than sending that energy back to the grid. Other functions such as peak lopping or load shifting or even full islanding are features that will help to maximise the return on your investment.

In temporary situations, such as for events, gridtogo™ rental solutions can be used to provide an alternative to running a diesel generator so that vehicles can be charged without impact on the environment. Often it is possible to “borrow” power from an available socket or other connection nearby. gridtogo™ can be programmed to make best use of what is available but without overloading the supply.

A temporary solution may be what you need while waiting for a grid upgrade or before you can decide where your EV charge points are best located. Our solutions enable you to build your EV fleet without being held back by power availability challenges.

CASE STUDIES

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.

Nano Series

Available in models from 400VA to 3kVA and with battery capacity from 740Whrs to 5kWhrs.

Hand portable, ruggedised, solid state, silent power supplies. Either an alternative or a complement to portable petrol generators. The nano series are ideal for power tools, computer equipment, lighting,recharging battery appliances, medical, A/V & communications equipment and much more.

Accessories include solar PV charging kits, in-vehicle charging kit, trolly base, connection and cable sets.

Please see our rate card for a full list of models and options. This is available on request.

×
Single Phase

With power outputs from 5 to 30kVA at 230V or 110V single phase AC and battery capacity ranging between 15 and 60kWhrs, our single phase range provide higher power and stored energy capacity.

Suitable for powering one day events on their own or together with solar PV to support extend use. Units can also be used to support limited mains power supplies or to be used with a diesel generator. Security cabins, emergency power supply for homes, utility work, dedicated welfare loads, individual EV charging or remote monitoring are all typical examples of applications to which these units are ideally suited.

Accessories include solar PV charging kits, road tow trailer, earthing, connection and cable sets. Suitable for cascade connection for higher power and capacity.

Please see our rate card for a full list of models and options. This is available on request.

×
Three Phase

Our three-phase range deliver power outputs ranging from 15 to 180kVA at 400/230V threephase AC with battery capacity ranging between 45 and 300kWhrs.

Applications are as diverse as supporting the accommodation, welfare and site loads in construction, tower cranes, large outdoor events, remote pumping, multiple EV charging, telecommunications towers, emergency power for multiple properties amongst many other duties.

Accessories include solar PV charging kits, earthing, connection and cable sets. Suitable for cascade connection for higher power and capacity.

Please see our rate card for a full list of models and options. This is available on request.

×
Self Contained

Self Contained Our range of self contained hybrid power systems offer complete “all-in-one” systems ranging between 10 and 500kVA. Suitable for quick and easy deployment and capable of long autonomous operation, these systems include diesel generator, high capacity fuel tank, integrated battery storage and automatic remote monitoring systems.

Deliver, plug in, turn on and away you go! These solutions are commonly used by utilities for longer-term emergency power, in remote telemetry and monitoring applications and other similar situations that are unmanned for long periods or where frequent fuel deliveries are undesirable and costly.

Please see our rate card for a full list of models and options. This is available on request.

×